Terex PT100 Operation And Maintenance Manual page 81

7 MAINTENANCE
7.22.2 Removal From Storage
Perform the following tasks to remove the Terex Rubber Track Loader from stor-
age and return to operating condition.
Return to Operating Condition:
• Remove protective lubricant from cylinder rods.
• Lubricate all chassis, loader and undercarriage points.
• Safely remove jack stands and lower machine to the ground.
• Install fully charged battery.
• Remove exhaust outlet cover.
• Perform pre-operation safety checklist in chapter 5 of this manual.
• Perform starting procedure (chapter 5)
• Let engine run while observing engine monitoring systems (gauges/lights). Look
for anything out of the ordinary. Should the optional engine temp. gauge read
excessive temperatures (or warning light illuminate) or should the oil pressure
or hydraulic oil temp. lights illuminate, shut the machine down immediately.
Diagnose and make needed repairs before resuming operation.
80