Table of Contents
Advertisement
7 MAINTENANCE
7.13-1
7.14 Track Tension Adjust
1.
The front of the drive table is
secured by two bolts (1).
Note: If the bolts (1) are at the rear of their
mounting slots they can be used to tighten
the track in their current positions. If they
are at the front of their slots, they need to
be relocated. There are a series of threaded
holes in the frame rail. The bolts can be
repositioned as needed to achieve proper tension.
2.
Once the bolts (1) are loosened or relocated, loosen the lock nut (2) on the
turnbuckle (3) and adjust by turning the turnbuckle (item 3).
3.
Once proper tension has been achieved (see page 20), tighten the locknut
(2) and the two bolts (1) to secure the drive table in place.
Note: If the track tensioner is stiff, it may be helpful to apply a penetrating lubri-
cant onto the threads prior to adjusting tension.
7.13-2
2
7.14-1
72
1
3
Hide quick links:
Advertisement
Table of Contents
