Zoom Guitar Effects Console G9.2tt2q Operation Manual page 19

Using the Expression Pedals
The display indication changes as follows.
PDL Calibration PDL Calibration
PEDAL1...MAX PEDAL1...MAX
3.
Push expression pedal 1 fully down
and then lift your foot off the pedal.
Push strongly,
so that pedal
touches here
When foot is lifted,
pedal returns slightly
4.
Press the [STORE/SWAP] key.
The adjustment is completed, and the unit returns
to the play mode.
HINT
• The module on/off switching point of expression
pedal 1 is not affected by the pedal position in
step 3. This position is always the same.
• For information about the module on/off
switching function, see page 33.
• If the indication "ERROR" appears, return to
step 2 and repeat the procedure.
36
■ Adjusting expression pedal 2
1.
Hold down the [PEDAL 2 SETTING]
key while turning on power to the
unit.
The display indication changes as follows.
PDL Calibration PDL Calibration
PEDAL2-V...min PEDAL2-V...min
2.
With expression pedal 2 fully raised,
press the [STORE/SWAP] key.
Pedal fully raised
The display indication changes as follows.
PDL Calibration PDL Calibration
PEDAL2-V...MAX PEDAL2-V...MAX
3.
Push expression pedal 2 fully down in
the vertical direction and then lift your
foot off the pedal and press the
[STORE/SWAP] key.
Push strongly,
so that pedal
touches here
When foot is lifted,
pedal returns slightly
The display indication changes as follows.
ZOOM G9.2tt
PDL Calibration PDL Calibration
PEDAL2-H...min PEDAL2-H...min
4.
Lift the stopper of expression pedal 2
to secure the pedal. Then turn the
pedal fully to the right and press the
[STORE/SWAP] key.
(2) Turn pedal
fully to the right
(1) Enable
stopper
Expression pedal 2
When you press the [STORE/SWAP] key, the
display indication changes as follows.
PDL Calibration PDL Calibration
PEDAL2-H...MAX PEDAL2-H...MAX
5.
Push the stopper of expression pedal
2 down, turn the pedal fully to the
right, and press the [STORE/SWAP]
key.
(1) Disable
(2) Turn pedal fully
stopper
to the right
Expression pedal 2
When you press the [STORE/SWAP] key, the
adjustment is completed, and the unit returns to
the play mode.
HINT
If the indication "ERROR" appears, return to step 2
and repeat the procedure.
ZOOM G9.2tt
Using the Expression Pedals
37