Position The Drx-1 And Drx-1C System Detectors In A Bucky - Carestream DRX-1 User Manual

Detector Operation

Position the DRX-1 and DRX-1C System Detectors in a Bucky

For the DRX-1 and DRX-1C System Detectors Only
For optimum performance, it is important to position the detector properly in a Bucky
when performing an exam. To provide a visual guide for positioning, the Service
representative places a set of two positioning labels on each Bucky when the system is
installed. These labels indicate detector orientation for portrait and landscape exams. To
orient the detector properly, hold the detector so that the position of the ID label on the
detector matches the position of the orientation label on the portrait or landscape label
on the Bucky.
Figure 7: Positioning Labels
Figure 8: Detector Positioning Label
2–8
DRX1 System
CAERSTREAM DRX1System
CAERSTREAM DRX1 System
DRX1 System
CAERSTREAM DRX1 System
DRX1System
CAERSTREAM DRX1System
DRX1System
CAERSTREAM DRX1System
H224_0042AA
H224_0043AA
AA5348 | 2012-12-20