Appendix
w
FLOAT
θ
wk FLOAT
The parameter collections "Control parameters for Levenberg-
Marquardt algorithm", "Control parameters for SCEUA algorithm" and
"LM-Floatpar" should NOT show up. These are special parameters for
setting the optimization algorithm.
11.1.2 Output
RMSE
FLOAT
θ
RMSE
FLOAT
K
with
and
, resp.
values for the retention and conductivity function. n
data points.
data" (JH-Paper).
Otherwise w
and w
θ
rated manually with parameters w
Rating for the retention data (only considered
if IN_WEIGHTFLAG = FALSE.)
Rating of the conductivity data (only
considered if IN_WEIGHTFLAG = FALSE.)
Root mean squared error of the retention
function adaptation
Root mean squared error of the conductivity
function adaption
,
and
being the measured resp. predicted
79/92
in equation (3) can be
k
and w
θ
is the number of
p
.
k