Refilling Window - UMS Hyprop User Manual

Set-up the HYPROP
5.2.3

Refilling window

This function is required when the HYPROP sensor head needs to
be refilled or during assembly of sensor head and Tensiometer
shafts (strictly recommended!!).
When the Tensiometer shafts are screwed back into the sensor
unit the pressure reading must be checked at any time to avoid
that excess pressure destroys the pressure transducer. Stop or
slow down if the pressure rises to much. Please read the chapter
4.2 "Refilling" for more details.
Fig. 42: tensioVIEW refilling window
44/92