Table of Contents
Advertisement
3.3 Sampling ring
A soil sample is taken with a stainless-steel sampling ring which has
a volume of 250 ml. The sampling ring is placed on the sensor unit
and fastened with the two clips. A silicone gasket completely seals
the bottom of the soil sample.
3.4 Software tensioVIEW
The HYPROP system is equipped with the tensioLINK
bus. With tensioLINK
The network is connected
to
a
PC
with
®
tensioLINK
converter. The Windows
software tensioVIEW
used for configuration of
the
devices
visualize
data.
software
automatically
recognizes all connected
devices.
Additional functions are
integrated in tensioVIEW
for optimized usage with
HYPROP (see chapter "Performing a measuring campaign".). The
functions are activated whenever the bus recognizes that a HYPROP
unit is connected.
If a laboratory scale with serial RS232 or USB interface is used
readings are automatically taken and evaluated by the tensioVIEW
software.
®
®
you are able to create an extended network.
the
USB-
®
is
and
to
The
®
15/92
Fig. 6: tensioVIEW
®
measuring
®
®
Advertisement
Table of Contents
