Table of Contents
Advertisement
Set-up the HYPROP
5.1.2
Connect the scale
A laboratory scale with interface is required. If the type of scale is not
in the following list, the scale is not supported and has to be send in
to UMS (incl. manual and interface cable).
Supported scales:
Kern EG2200 (recommended)
Kern EW3000
Kern 572
CHYO MK2000B
Mettler Toledo SICS
Mettler Toledo PM2000
COBOS COBOS-CB Complet
If the scale has a serial RS232 interface connect it to a free COM-
port on your PC. You can use a RS232-USB-converter if no COM-
port is available on your PC. Please carefully follow the instructions
for the RS232-USB-converter.
The set-up of the scale in tensioVIEW® is described in chapter 5.3 p
46 „Add the Scale"
Fig. 39: Scale
38/92
Advertisement
Table of Contents
