Set-Up The Hyprop - UMS Hyprop User Manual

Set-up the HYPROP

5 Set-up the HYPROP
5.1 Connect the system components
The next step is to connect the components with tensioLINK
Up to 20 sensor units can be linked to a PC at the same time with
the supplied bus cables and distributors.
For this you require:
 The prepared HYPROP assembly
HYPROP connection cable

 Adapter cable
®
 tensioLINK
 9 VDC mains power unit
T-connector piece

Fig. 37: tensioLINK T-connector piece
USB-converter
HYPROP connecting cable
36/92
®
.
T-connector
Adapter cable
connected to the
®
tensioLINK USB-
converter
Cable of the 9 V
mains power unit