Device Settings > System - Reolink C2 User Manual

4.5 Device Settings > System
Under this menu, you may check the system information of the device, configure
the time settings, upgrade the firmware of the camera and reboot it.
4.5.1 System > General
Under ​ G eneral​ , users can set up the Video Standard and time settings etc.
➢ Video Standard​ : Choose ​ P AL or ​ N TSC according to your area. If this is set
incorrectly, the camera's picture may be black and white, flickering or similar.
● PAL​ : used in Western Europe and Australia.
● NTSC​ : used in the US, Canada and Japan.
➢ Time Zone​ : Choose the time zone where you are.
➢ Date Format​ : the format of the date you want the camera to show.
➢ System Time​ : the current time of the camera. It could be edited manually.
➢ Synchronize Local Time​ : Click to synchronize the camera time with local PC
time.
➢ DST Settings​ : Turn on and set up DST if DST is applied in your area, As to how
to configure it, please refer to​
➢ Enable Password​ : Enable or disable the password to login the camera.
➢ Device Name​ : Shows the name of your camera. You can modify the name here.
Click ​ O K​ to save and enable settings.
H​ o w to configure DST Settings​
42
.