Port Settings - Reolink C2 User Manual

Port Settings

For some remotely accessing, you may need to check or change the port
settings.
➢ Media Port​ : Camera will use this port to login to the Reolink client software.
The default value is 9000 and you can change it.
➢ HTTP Port​ : Used to login to the web interface of the camera by a web
browser. The default value is 80 and you can change it.
➢ HTTPS Port​ : Default value is 443 and you can change it.
➢ RTSP Port​ : Used to send the streaming file to Realplayer, the default value is
554 and you can change it.
➢ RTMP Port​ : Used to send the streaming file to Flash Player, the default value
is 1935 and you can change it.
➢ Onvif Port​ : used to add the camera to third party Onvif client software. The
default value is 8000 and you can change it.
Click ​ O K​ to save and enable settings.
35