How To Set Preset - Reolink C2 User Manual

: Call, click this button, the camera will turn to the preset position you have
chosen.

How to set preset

1. Click the directional arrows on the pan/tilt wheel to turn the camera lens.
2. when it points to the position you prefer, choose Preset 1(highlighted in
yellow color), then click the
status will become Set.
3. When you need to set another preset, repeat the above steps, and choose
Preset 2.
4. If you want the camera to turn to the preset you already set, choose the
Preset Point Name, then click the
➢ Cruise Path
1. Choose ​ C ruise Path 0​ and go to
2. Choose ​ C ruise Point 1​ and go to ​ C ruise Point Setup​ .
button to record the preset position, Enable
button.
to enter the ​ C ruise Setup​ page.
13