Ni435X Instrument Driver And Ni-Daq - National Instruments NI 4350 User Manual

NI435 X Instrument Driver and NI-DAQ
© National Instruments Corporation
data storage by adding timestamps, measurements, user name, and
comments.
Your NI 4350 works with VirtualBench-Logger and
VirtualBench-DIO. VirtualBench-Logger is a turn-key application that
allows you to make measurements as you would with a standard
bench-type data logger. VirtualBench-DIO allows you to read from or
write to the digital I/O lines.
The NI435X instrument driver provides flexibility and programmability
in a standard instrument driver format.
The instrument driver application programming interface (API) is
designed after a classical, full-featured data logger instrument driver.
The NI435X instrument driver works with LabVIEW,
LabWindows/CVI, or conventional programming languages such as C,
C++, and Visual Basic.
Whether you are using the NI435X instrument driver,
VirtualBench-Logger, LabVIEW, or LabWindows/CVI, your
application uses the NI-DAQ driver software, as illustrated in
Figure 1-1.
1-5
Chapter 1 Introduction
NI 4350 User Manual