Table of Contents
Advertisement
3e–527A3 Wireless Access Point – 8 Port
The random configuration feature is intended to reduce the effort to
generate new keys for the system and to create a new password for the
CryptoOfficer role that is performing this operation. When the generate
button is pushed, the following parameters are randomized:
• AD SSID
• AP encryption key (AES-192)
• Bridge SSID
• Bridge encryption key (AES-192)
• Bridge channel (802.11a, random channel in 5.8GHz band)
• DSL encryption key (AES-192)
• Configuration button password
• CryptoOfficer password
The following parameters are set:
• Bridge mode: auto
• Bridge radio: freq=11a, txpower=auto, broadcasting ssid=disabled
• AP radio: txpower=auto, broadcasting ssid=disabled
All other system parameters are unchanged.
IMPORTANT: The three fields that are listed (CryptoOfficer Pass-
word, AP Encryption Key, and Configuration Password Button) should be
recorded since they won't be visible after reboot. Once you record these
values, the file can be installed by clicking on the "Install file" button. The
new file will be installed and the unit will reboot.
29000152-001 B
Chapter 3: Access Point Configuration
63
Advertisement
Table of Contents
