Dynamic Key Exchange - 3e Technologies International 3e-527A3 User Manual

3e–527A3 Wireless Access Point – 8 Port

Dynamic Key Exchange

Dynamic key management requires the installation of the 3e-030
Security Server software which resides on a self-contained workstation
connected to the 3e–527A3 over the WAN port. The Security Server soft-
ware configuration includes: obtaining a root certificate from a Certificate
Authority (CA) like Microsoft; obtaining user certificates based on the CA
which will be used by the clients; and configuring the 3e Technologies
International's Security Server software with the appropriate root certifi-
cate. The Security Server software application is discussed in a separate
manual.
If you have installed the Security Server software, Dynamic Key
Management is the preferred security setup. Configure the IP address
and password of the security server and set the key type. Key type will be
either 3DES (192-bit), or AES (128-bit, 192-bit or 256-bit). Thereafter, the
Security Server handles authentication dynamically.
Once you have selected the options you will use, click Apply.
29000152-001 B
Chapter 3: Access Point Configuration
31