Table of Contents
Advertisement
3e–527A3 Wireless Access Point – 8 Port
Basic Features
The 3e–527A3 is housed in a sturdy case which is not meant to be
opened except by an authorized technician for maintenance or repair.
If you wish to reset to factory settings, use the reset function available
through the web-screen management module.
The 3e–527A3 is wall-mountable.
It has the following features:
• Ethernet uplink WAN port
• Local Ethernet LAN port (for configuration only)
• Wireless Access Point with operating range of 2000+ feet
• Bridge
• Power over Ethernet (PoE)
• Above average temperature range for extreme environments
(with TEC option)
• AES, 3DES, DKE, or FIPS 802.11i, depending on setup
• HTTPS/TLS secure Web
• DHCP client
• Access Point or Gateway with Bridging also available in either
mode
• Bandwidth control
• Adjustable Radio Power
• MAC address filtering
• Publicly Secure Packet Forwarding
• Rogue AP Detection
• Encrypted Ethernet port
• Auto bridging/Mesh Networking
• Configuration File transfer
• IP aliasing on gateway mode
• Operates on Channels 149, 153, 157, 161 and 165
The following cryptographic modules have been implemented in the
3e–527A3 .
• AES (128/192/256 bit)
• 3DES (192 bit)
• DKE
• FIPS 802.11i
2
Chapter 1: Introduction
29000152-001 B
Advertisement
Table of Contents
