Table of Contents
Advertisement
3e–527A3 Wireless Access Point – 8 Port
Advanced
The Wireless Access Point — Advanced screen allows you to enable
or disable load balancing and publicly secure packet forwarding.
Load balancing is disabled by default. The load balancing feature bal-
ances the wireless clients between APs. If two APs with similar settings
are in a conference room, depending on the location of the APs, all wire-
less clients could potentially associate with the same AP, leaving the other
AP unused. Load balancing attempts to evenly distribute the wireless
clients on both APs.
When publicly secure packet forwarding is enabled, wireless clients
can not talk to other wireless clients directly at Layer 2. However, they
both can have access to others that are not associating to the same AP.
Once you have made any changes, click Apply to save.
Wireless Bridge
The Wireless Bridge screens are described in Chapter 5.
29000152-001 B
Chapter 3: Access Point Configuration
35
Advertisement
Table of Contents
