Hitachi NVM Navigator v03-07 User Manual page 278

4. If the remote-shutdown-failed LPAR (OS) is in the Deactivate (power-off)
state, follow the sub steps below.
a. The Deactivate (power-off) state indicates that the shutdown operation
did not end within five minutes. Confirm if there was any particular
cause in the prolonged shutdown processing by the OS.
b. If you find that the shutdown processing in this particular OS
environment usually requires more than five minutes, change the wait
time value by the following operation: Select Migration Option from
Setting menu in the "Main" window of HVM Navigator, select
Migration Option menu in the left pane of the "Option" window
opened, type a new value in Waiting TimeOut Limit text box, and
click Apply or OK button.
Figure 6-14 Option window
For installing plink.exe and specifying the path pointing at the folder where
Plink.exe is installed, see Hitachi Compute Blade HVM Navigator User's Guide—
Getting Started.
6-12 Troubleshooting
HVM Navigator User's Guide - Migration