Hitachi NVM Navigator v03-07 User Manual page 121

2. Set FC zonings for SAN switches connected with the LPAR to migrate.
a. When you set port zonings
You don't need to set anything to execute an LPAR migration in
Concurrent Maintenance mode.
b. When you set WWPN zonings
An example of WWPN zoning configuration including a migration WWPN
is shown in the following figures. Configure WWPN zoning configurations,
seeing the correct configuration of the following figures. (Don't add a
migration WWPN in a zone with the WWPN corresponding to the
counterpart of the migration WWPN.)
[Correct configuration]
Guest OS
FC
WWN_OS
WWN_OS_Mig
WWN_OS: WWPN on an FC port on a guest OS
WWN_OS_Mig: migration WWPN on an FC port on a guest OS
: Zone with WWPN
(Zone OS)
[Correct configuration]
Zone with WWPN (Zone OS)
zone: Zone OS
HVM Navigator User's Guide - Migration
FCSW
Zone OS
WWN_OS
WWN_OS_Mig
Zone OS_Mig
: Zone necessary to be configured for LPAR
migration in Concurrent Maintenance mode
(Zone OS_Mig)
Zone necessary to be configured for LPAR
migration in Concurrent Maintenance mode
(Zone OS_Mig)
zone: Zone OS_Mig
WWN_OS
WWN_D
Migration procedures
Storage device
WWN_D
WWN_D
LU
WWN_OS_Mig
WWN_D
3-21