Usage Notes - Hitachi NVM Navigator v03-07 User Manual

This chapter describes the usage notes.
Backing up and restoring HVM configuration

Initialization of HVM configuration (DC command of management module)

Changing HVM system time on destination HVM

Operation deterrence

Exchanging NIC or FC HBA switches while server blade is in operation

Setting network segment used by activated LPAR as migration path

State of NIC or FC HBA ports on destination HVM

High CPU and network load

Migration to destination with difference on connection to storage device

Changing VNIC System No. on the system environment where LPAR

migration has been executed
Migration of parameters to apply remote shutdown to source LPAR

Service ratio after migration

Migration of server with dedicated PCI device allocation

Migration of MAC addresses

Migration of WWPNs

Migration of LPAR enabling VC (Virtual COM) console

Migration of LPAR with assigned virtual NICs

Ports with Inter-LPAR Packet Filterings set to "Enable" are assigned to the

LPAR to migrate
Migration of USB assignment state

Certain FC HBA port is changed from shared to dedicated

Failure on remote shutdown of Windows

Shutting down or rebooting guest OS on the LPAR to migrate

Migrating LPAR where EFI Shell is running

Packet-lost during LPAR migration

HVM Navigator User's Guide - Migration

Usage notes

5
Usage notes
5-1