HEIDENHAIN TNC 620 User Manual page 507

Setting Meaning
BROADCAST The broadcast address of the control
is needed only if it is different from the
standard setting. The standard setting is
formed from the net and host ID, in which all
bits are set to 1.
ROUTER Network address of default router: This
entry is required only if your network
consists of several subnetworks
interconnected by routers.
The entered network configuration does not become
effective until the control is rebooted. After the
network configuration is concluded with the OK
button or soft key, the control asks for confirmation
and reboots.
Configuring network access to other devices (mount)
Make sure that the person configuring your TNC is a
network specialist.
Not all Windows operating systems require entry
of the username, workgroup and password
parameters.
Connect the TNC (port X26) with a network or a PC
In the file manager (PGM MGT), select the Network soft key
Press the MOD key. Then enter the code number NET123.
Press the DEFINE NETWORK CONNECTN soft key.
The dialog window for the network configuration opens
TNC 620 | User's Manual
HEIDENHAIN Conversational Programming | 5/2013
Ethernet interface
16
16.9
507