Clearing Errors - HEIDENHAIN TNC 620 User Manual

Clearing errors

Clearing errors outside of the error window
Clear the error/message in the header: Press the
CE key
In some operating modes (such as the Editing
mode), the CE button cannot be used to clear the
error, since the button is reserved for other functions.
Clearing more than one error
Open the error window
Clear individual errors: Position the highlight on the
error message and press the DELETE soft key
Clear all errors: Press the DELETE ALL soft key
If the cause of the error has not been removed, the
error message cannot be deleted. In this case, the
error message remains in the window.
Error log
The TNC stores errors and important events (e.g. system startup)
in an error log. The capacity of the error log is limited. If the log is
full, the TNC uses a second file. If this is also full, the first error log
is deleted and written to again, and so on. To view the error history,
switch between CURRENT FILE and PREVIOUS FILE.
Open the error window.
Press the LOG FILES soft key.
Open the error log file: Press the ERROR LOG soft
key.
If you need the previous log file: Press the
PREVIOUS FILE soft key.
If you need the current log file: Press the
CURRENT FILE soft key.
The oldest entry is at the beginning of the error log file, and the
most recent entry is at the end.
TNC 620 | User's Manual
HEIDENHAIN Conversational Programming | 5/2013
Error messages
4
4.6
131