Maintenance - AEMC J93 User Manual

Use only factory specified replacement parts. AEMC
for any accident, incident, or malfunction following a repair done other than by its
service center or by an approved repair center.
5.1 Warning
■ To ensure optimum performance, it is important to keep the probe jaw mating
surfaces clean at all times. Failure to do so may result in error in readings.
■ To avoid electrical shock, do not attempt to perform any servicing unless you
are qualified to do so.
■ Do not perform any service while the current probe is on any circuit.
■ To avoid electrical shock and/or damage to the instrument, do not get water or
other foreign agents into the electronic module.
5.2 Cleaning
Disconnect the instrument from any source of electricity.
■ Use a soft cloth, dampened with soapy water. Rinse with a damp cloth and
immediately dry with a dry cloth.
■ Do not use alcohol, solvents, or hydrocarbons.
■ Do not splash water directly on the instrument.
AC/DC Current Probe Model J93
Shop for AEMC products online at:

5. MAINTENANCE

ShopAEMC
www.
will not be held responsible
®
.com 1.877.766.5412
13