5.3 Battery Replacement
Disconnect the instrument from any source of electricity.
To replace the battery, proceed as follows:
■ Insert a tool, not more than 3mm in diameter, in the hole in the battery com-
partment cover.
■ Push to unlock the battery compartment cover, then slide it off.
■ Remove it completely by hand.
■ Remove the battery and the shim from the compartment.
■ Place the new battery in the compartment with the polarity as indicated on the
label. Then replace the shim.
■ Put the battery compartment cover back in the slide and push it in until you
hear a click.
Used batteries must not be treated as ordinary household waste. Recycle
them appropriately.
14
Shop for AEMC products online at:
ShopAEMC
www.
AC/DC Current Probe Model J93
.com
1.877.766.5412