Maintenance - AEMC 502 User Manual

5.1
• Remove the test leads on any input before
opening the case.
• Do not operate the clamp-on probe without a
battery case cover.
• To avoid electrical shock, do not attempt to
perform any servicing unless you are qualified
to do so.
• To avoid electrical shock and/or damage to the
instrument, do not get water or other foreign
agents into the probe.
5.2
• To clean the probe, wipe the case with a damp
cloth and mild detergent.
• Do not use abrasives or solvents.
• Do not get water inside the case. This may
lead to electrical shock or damage to the
instrument.
16
ts Online at:
CHAPTER 5

MAINTENANCE

Warning!
Cleaning
TRMS Clamp-on Meter Model 502
GlobalTestSupply
www. .com
sales@Glo