Table of Contents
Advertisement
Mounting muffler
8
Threaded fasteners not
tightened to the specified
128
torque can work loose or their
threads can suffer damage.
Always have the tightening
torques checked by a specialized
workshop, preferably an
authorized BMW Motorrad
retailer.
z
Turn muffler 3 clockwise until
it rests on passenger footpeg
bracket.
Install screw 1 and washer 2.
Muffler on rear frame
14 lb/ft (19 Nm)
Tighten nut 1 of clamp 2.
Clamp on muffler and
exhaust manifold
16 lb/ft (22 Nm)
Fasten cover 2 in holder 3 and
position.
Install screws 1.
Light sources
Replacing low and high-
beam bulbs in headlight
The alignments of the
connectors and the light
sources may differ from the
following illustrations.
The operations for replac-
ing the low-beam headlight
described here apply similarly to
the high-beam headlight.
Advertisement
Table of Contents
