Table of Contents
Advertisement
Charging the battery via
the onboard socket is only
possible with suitable chargers.
Unsuitable chargers can result in
damage to the motorcycle elec-
tronics.
Use suitable BMW chargers.
The correct charger is available
through your authorized
BMW Motorrad retailer.
Charge disconnected battery
via onboard socket.
The motorcycle's onboard
electronics know when the
battery is fully charged. The
onboard socket is switched off
when this happens.
Comply with operating instruc-
tions of charger.
If you are unable to
charge the battery via
the onboard socket, you
may be using a charger that
is not compatible with your
motorcycle's electronics. In
this case, charge the battery
directly at the terminals of the
disconnected battery.
Charging disconnected
battery
Charge battery using a suitable
charger.
Comply with operating instruc-
tions of charger.
Once battery is fully charged,
disconnect charger's terminal
clips from battery terminals.
In the case of longer peri-
ods when the motorcycle is
not being used, the battery must
be recharged regularly. See the
instructions for caring for your
battery. Always fully recharge
the battery before returning it to
use.
Removing and installing
battery
Switch off ignition.
Remove screw 1.
Pull battery cover at top slightly
forward at the positions 2.
In order not to damage the bat-
tery cover and the mount, re-
move the battery cover upward
at position 3.
with anti-theft alarm system
(DWA)
OE
Switch off anti-theft alarm sys-
tem if necessary.
8
141
z
Advertisement
Table of Contents
