Table of Contents
Advertisement
8
130
Remove connector with light
source 1 for low-beam head-
light by turning it counterclock-
wise.
z
Remove connector with light
source 2 for high-beam head-
light by turning it counterclock-
wise.
To prevent dirt from being de-
posited on the glass surface,
always use a clean, dry cloth to
hold the light source.
To protect glass against soiling,
only grasp light source by base.
Pull light source 3 out of
connector 1. When doing so,
make sure that the holder 2
remains on the connector.
Replace defective light source.
Bulbs for low-beam
headlight
H7 / 12 V / 55 W
Bulb for high-beam
headlight
H7 / 12 V / 55 W
Insert connector with light
source 1 for low-beam
headlight in light housing and
turn clockwise.
Insert connector with light
source 2 for high-beam
headlight in light housing and
turn clockwise.
Advertisement
Table of Contents
