Table of Contents
Advertisement
BMW Motorrad front wheel
stand.
Place motorcycle on center
stand, ensuring that it is resting
on a firm and level support sur-
face.
Use basic stand with front
wheel mount. The base stand
and its accessories are avail-
able through your authorized
BMW Motorrad retailer.
Loosen mounting bolts 1.
Push two mounts 2 outward,
continuing until front
suspension fits between them.
Use locating pins 3 to set front
wheel stand to desired height.
Center front wheel stand rela-
tive to front wheel and push it
against front axle.
Align two mounts 2 so that
front suspension rests securely
on them.
Tighten securing screws 1.
If the motorcycle is resting
on the center stand: The
motorcycle is raised too far at the
front, the center stand lifts off the
ground and the motorcycle can
tip over to the side.
When raising the vehicle, make
sure that the center stand re-
mains on the ground.
Apply uniform pressure to push
front wheel stand down and
raise motorcycle.
8
111
z
Advertisement
Table of Contents
