Table of Contents
Advertisement
carry a complete set of spare
3
bulbs on the motorcycle.
Possible cause:
36
Taillight or rear turn indicator de-
fective.
Taillight or rear turn indicator
must be replaced.
Replacing LED tail light
(
138).
Replacing front and rear turn
indicator light sources (
z
Onboard system voltage
low
appears on the display.
Generator power is only just
sufficient to supply all consumers
and charge the battery.
Possible cause:
Too many consumers switched
on. Onboard system voltage
tends to drop particularly at low
engine rpm and when the engine
is idling.
When riding at low engine revs,
switch off all electrical equip-
ment that is not necessary for
road safety (e.g. heated han-
dlebar grips or additional head-
light).
Onboard system voltage
critical
shows yellow.
135).
appears on the display.
Generator power is no longer
sufficient to supply all consumers
and charge the battery. In order
to ensure that the engine can
be started and the motorcycle
ridden, the onboard electronics
switch off the electricity supply
to the onboard sockets and the
additional headlights. In extreme
cases the seat heating and the
grip heating might also be shut
down.
Possible cause:
Too many consumers switched
on. Onboard system voltage
tends to drop particularly at low
engine rpm and when the engine
is idling.
When riding at low engine revs,
switch off all electrical equip-
ment that is not necessary for
road safety (e.g. heated han-
dlebar grips or additional head-
light).
Battery charging voltage
insufficient
shows red.
appears on the display.
A discharged battery will
lead to the failure of vari-
ous motorcycle systems such as
lighting, engine or ABS. This can
result in dangerous driving situa-
tions.
Advertisement
Table of Contents
