Table of Contents
Advertisement
Release button 1 within two
4
seconds.
remains off or continues to
66
flash.
ASC/DTC is now activated.
As an alternative, the ignition
can also be switched off and
then on again.
ASC/DTC error
z
If the ASC/DTC warning light
lights up after switching the
ignition off and on and then
continuing driving above the
minimum speed, an ASC/
DTC fault has occurred. (Min-
imum speed min 3 mph (min
5 km/h))
Electronic suspension
adjustment
OE
with Dynamic ESA
Adjustment options
Using the Dynamic ESA elec-
tronic suspension adjustment
system you can easily adjust your
motorcycle to the load being car-
ried.
Using leveling sensor, Dy-
namic ESA detects movements
of the running gear and responds
to them by adjusting the damper
valves. As a result, the running
gear is adjusted to the conditions
of the ground.
Starting from the basic setting
(ROAD), the damping can also be
set harder (DYNAMIC).
Setting suspension
compliance
Switching on ignition (
Spring preload is displayed in
the multifunction display in area
1, and damping is indicated in
area 2.
46).
Advertisement
Table of Contents
