Table of Contents
Advertisement
Replacing bulbs for
license plate light
Remove rider's seat (
Make sure ground is level and
firm and place motorcycle on
its center stand.
Remove screws 1.
79).
Remove screws 2 and take off
cover for license-plate carrier 3.
Pull license-plate light 4 out of
light housing.
Remove light source 5 from
the socket.
Replace defective light source.
Bulb for license-plate
light
W5W / 12 V / 5 W
To prevent contaminants from
being deposited on the glass
surface, always use a clean, dry
cloth to hold the light source.
8
137
z
Advertisement
Table of Contents
