Lancom 1751 UMTS Manual page 37

110584_LC-1751-UMTS-MANUAL-EN.book Page 37 Tuesday, February 26, 2008 5:16 PM

Activate location verification with the 'Enable location check' option.
Select the method for the location check:
'Self call' for a check via ISDN by means of a return call.
'Call forwarding check' via ISDN by requesting the call number from
the exchange. No call-back is necessary in this case.
'GPS verification' for a check on the geographical coordinates.
For a location check by GPS an appropriate GPS antenna must be con-
nected to the AUX connector on the device. Additionally, a SIM card
for mobile telephone operation has to be inserted and the device must
be logged on to a mobile phone network.
For the location check enter 'Self call' or 'Call forwarding check' and enter
the destination number as the telephone number to be used for the check.
For location verification by GPS enter the necessary parameters:
Degrees latitude and longitude
LANCOM 1751 UMTS
Chapter 3: Basic configuration
37