Table of Contents
Advertisement
7
ACCESSORIES
This model can be equipped with different accessories that should be evaluated according to the
user's and/or his/her attendant's needs.
7.1
Push handles for attendant
You can assemble these push handles only on a "sport"
backrest tubes that have with no handles.
You can height adjust them in order to offer a better
handhold and a better pushing position to the attendant.
The attendant can easily adjust them and remove them.
To adjust them in height, unscrew the lever L, slide the
tube up or down to the desired height, position the handle
backward and finally screw the lever L tightly.
To remove the push handle, unscrew the lever L and slide
the tube off the support.
To put on the push handle, insert it and let it go through
the support and adjust its height as above mentioned.
Important warning for the attendant: the
push handle tubes are safe only when the two
lever L are tightly screwed, in fact, this
condition prevent the tubes from sliding up or
down accidentally.
Before pushing the wheelchair, make sure the
two tubes are safely locked.
Rehateam s.r.l. cannot be responsible for any
damage or injury due to neglecting this
warning.
7.2
This accessory becomes necessary when the dimensions of the wheelchair impede getting in or
through narrow rooms such as a door or a lift.
To use this accessory you have to remove the rear wheels.
This way, the wheelchair becomes narrower and shorter.
You can remove the transit wheel from its support.
Press the pin A that holds it and slide the tube off the support S.
To put on the transit wheel, insert the tube in the support S until the pin A touches the same
support. Then, press the pin and slide the tube in until the pin locks in the hole of the support.
L
L
Transit wheels
A
For a correct assembly of the transit wheel, you have to remember that when inserting it
into the support, the pin A should always face toward the inside of the wheelchair
You have to remember that while using the transit wheels (with the rear wheels
removed), the parking brakes will not work at all.
S
A
Tekna Tilt
23
Advertisement
Table of Contents
