1. Manuals
  2. Brands
  3. Acrosser Technology Manuals
  4. Network Hardware
  5. AR-B5205 Series
  6. User manual

Acrosser Technology AR-B5205 Series User Manual

Intel pentium m/celeron m 478-pin micro-fcpga processor networking board
Hide thumbs Also See for AR-B5205 Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Quick Manual
AR-B5205 Series User Manual
AR-B5205
Intel® Pentium® M/Celeron® M 478-pin Micro-FCPGA PROCESSOR
NETWORKING BOARD

User Manual

Manual Rev.: 1.0
Book Number: AR-B5205-2010.02.09
1

Advertisement

Table of Contents
loading

Related Manuals for Acrosser Technology AR-B5205 Series

Summary of Contents for Acrosser Technology AR-B5205 Series

  • Page 1: User Manual

    AR-B5205 Series User Manual AR-B5205 Intel® Pentium® M/Celeron® M 478-pin Micro-FCPGA PROCESSOR NETWORKING BOARD User Manual Manual Rev.: 1.0 Book Number: AR-B5205-2010.02.09...
  • Page 2 AR-B5205 Series User Manual Revision Version Date Author Description 2010/02/09 Xavier Initial release.
  • Page 3 AR-B5205 Series User Manual Copyright 2010 All Rights Reserved. Manual’s first edition: For the purpose of improving reliability, design and function, the information in this document is subject to change without prior notice and does not represent a commitment on the part of the manufacturer.
  • Page 4 AR-B5205 Series User Manual Table of Contents 1 Introduction ..............5 1.1 Specifications....................6 1.2 Package Contents ..................7 2 H/W Information............. 9 2.1 Locations - Main Chips and Standard Connectors ........9 2.2 Connectors and Jumper Setting ..............11 2.3 Connector and Jumper Setting Table ............

  • Page 5: Introduction

    LCD Module(AR-R5205 series only) supplies a good tool for local system management, maintenance and diagnostics. AR-B5205 series offer the flexibility, and power efficiency which are ideally for many internet security applications, such as UTM (Unified Threat Management), WAS (Web Access Management), VPN and Anti-Spam mail server etc..

  • Page 6: Specifications

    AR-B5205 Series User Manual 1.1Specifications Item Description General 1. Onboard Celeron M 600MHz 512KB L2 Cache. 2. Onboard Celeron M 1GHz zero L2 cache. 3. Support socket type Intel Celeron M and Pentium M CPU. Memory Two SO-DIMM socket support dual channel DDRII 400 SDRAM up to 2GB.

  • Page 7: Package Contents

    AR-B5205 Series User Manual 1.2 Package Contents Check if the following items are included in the package. Quick Manual. AR-B50205. 1 x Software Utility CD.

  • Page 8: Block Diagram

    AR-B5205 Series User Manual Block Diagram Intel Pentium M processr Intel Celeron M processr FSB400/478-pin uFCPGA FSB400/479-ball uFCBGA HOST BUS CRT OUT DDR2 SO-DIMM x2 NORTH BRIDGE 82910GMLE SATA PCI BUS SATA x2 82541PI x2 SOUTH BRIDGE PATA PCI SLOT...

  • Page 9: H/W Information

    AR-B5205 Series User Manual H/W INFORMATION This chapter describes the installation of AR-B5205. At first, it shows the function diagram and the layout of AR-B5205. It then describes the unpacking information which you should understand, as well as the jumper/switch settings for the AR-B5205 configuration 2.1 Locations -...
  • Page 10 AR-B5205 Series User Manual (Bottom side) MPCI1 Mini-PCI Slot Slot for Compact Flash DDR2SODIMM2 Connector for DDR2 SDRAM...

  • Page 11: Connectors And Jumper Setting

    AR-B5205 Series User Manual 2.2 Connectors and Jumper Setting 2.2.1 Locations (Top side) LED2~LED7 (Right to Left) LED indicator for LAN1~LAN6 Connector for Power Switch (Right to Left) ATX_12V1 Connector for Regular ATX 4 pin 12V CPLD Program Interface Input USB2 &...

  • Page 12: Connector And Jumper Setting Table

    AR-B5205 Series User Manual 2.3 Connector and Jumper Setting Table 2.3.1 LED2~LED7 (Right to Left) 2.3.2 CN7-CPLD Program Interface SIGNAL 3.3V COLOR SIGNAL GREEN LINK/ACT GREEN/YELLOW 100/1000 2.3.4 LED1-Indicator for Power-On and Hard 2.3.3 USB2&USB3-Each Connector for Two Ports Disk...
  • Page 13 AR-B5205 Series User Manual 2.3.7 RST_BTN1-Bottom for System Reset 2.3.8 LED0-The Same Function as LED1 COLOR SIGNAL STATUS FUNCTION GREEN POWER Push then Release System Reset YELLOW HARD DISK 2.3.9 PWR1-Connector for Power Input 2.3.10 CN8-Connector for Power Switch SIGNAL...
  • Page 14 AR-B5205 Series User Manual 2.3.14 KBMS1-PS/2 Keyboard and Mouse 2.3.13 JP2-RTC power and reset Connector SIGNAL SIGNAL STATUS FUNCTION MS DATA NORMAL 1-2 CLOSE (DEFAULT) KB DATA MS CLOCK KB CLOCK 2-3 CLOSE RTC RESET 2.3.16 GPIO1-Connector For General Purpose 2.3.15 CN3-Power Supply for SATA Hard Disk...

  • Page 15: Bios Setting

    AR-B5205 Series User Manual BIOS SETTING This chapter describes the BIOS menu displays and explains how to perform common tasks needed to get the system up and running. It also gives detailed explanation of the elements found in each of the BIOS menu displays. The following topics are covered:...

  • Page 16: Main Setup

    AR-B5205 Series User Manual 3.1 Main Setup Option Choice Description To set the system date. Note that the ‘Day’ automatically Date Setup changes when you set the date. Time Setup To set the system time. IDE Channel 0 Press <Enter> to view the IDE device’s information and Master/Slave related parameters.

  • Page 17: Advanced Setup

    AR-B5205 Series User Manual 3.2 Advanced Setup Option Choice Description This category speeds up Power On Self Test (POST) after you Quick Power On Enabled have powered up the computer. If it is set to Enabled, BIOS will Disabled Self Test shorten or skip some check items during POST.

  • Page 18: Power Setup

    AR-B5205 Series User Manual 3.3 Power Setup...

  • Page 19: Pnp/Pci Setup

    AR-B5205 Series User Manual 3.4 PnP/PCI Setup Option Choice Description Normally, you leave this field Disabled. Select Enabled to Reset reset Extended System Configuration Data (ESCD) when you Enabled Configuration exit setup. If you have installed a new add-on and the system...

  • Page 20: Peripheral Setup

    AR-B5205 Series User Manual 3.5 Peripheral Setup Option Choice Description Onboard Serial Port 1 Serial Port 1: 3F8 / IRQ4 Select an address and the corresponding Onboard Serial Port 2 Serial Port 2: 2F8 / IRQ3 interrupt for each serial port.

  • Page 21: Pc Health Setup

    AR-B5205 Series User Manual 3.6 PC Health Setup...

  • Page 22: Boot Setup

    AR-B5205 Series User Manual 3.7 Boot Setup Option Choice Description Hard Disk CDROM First / Second / Third The BIOS attempts to load the operating USB-FDD Boot Device/Other system from the devices in the sequence USB-CDROM Boot Device selected in these items.

  • Page 23: Exit Setup

    AR-B5205 Series User Manual 3.8 Exit Setup Option Choice Description Press “Y” to store the selections made in the menus in CMOS – a special section of Pressing <Enter> on this memory that stays on after you turn your item for confirmation: system off.
  • Page 24 AR-B5205 Series User Manual length, and press <Enter>. The password typed now will clear any previous password from the CMOS memory. You will be asked to confirm the password. Type the password again and press <Enter>. You may also press <Esc>...

  • Page 25: Bios Refreshing

    AR-B5205 Series User Manual BIOS REFRESHING, WATCHDOG AND GPIO PROGRAMMING 4.1 BIOS Refreshing The BIOS program instructions are contained within computer chips called FLASH ROMs that are located on your system board. The chips can be electronically reprogrammed, allowing you to update your BIOS firmware without removing and installing chips.

  • Page 26: Watchdog Programming

    AR-B5205 Series User Manual 4.2 WatchDog Programming This section describes the usage of WatchDog. AR-B5205 integrated the WatchDog that enable user to reset the system after a time-out event. User can use a program to enable the WatchDog and program the timer in range of 1~255 second(s)/minute(s). Once user enables the WatchDog, the timer will start to count down to zero except trigger the timer by user’s program...
  • Page 27 AR-B5205 Series User Manual //=========================================================================== // Main procedure //=========================================================================== int main(int argc, char *argv[]) unsigned char IO_Port_Address=0x2E; unsigned char Time; int Temp; if ( argc != 2 ) { Show_Help(); return 1; clrscr(); Time=atoi(argv[1]); // Set Watchdog outportb(IO_Port_Address,0x87); // (EFER) Extended Functions Enable Register outportb(IO_Port_Address,0x87);...
  • Page 28 AR-B5205 Series User Manual //=========================================================================== // Function : Show_Help() // Input // Change : - // Return : - // Description : Show Title string. //=========================================================================== // CPU <-- KBRST(Pin.60) <--- SIO // SIOPWROK --> ??? --> WDTO# <--- SIO void Show_Help() clrscr();...

  • Page 29: Gpio Programming

    ( argc > 1 ) { Show_Help(); return 1; } clrscr(); textcolor(WHITE); gotoxy(1, 1); cprintf("<>==========================================================================<>"); gotoxy(1, 2); cprintf("|| W83627HF/HG GPIO Test Utility v1.1 Acrosser Technology Co., Ltd. ||"); gotoxy(1, 3); cprintf("<>==========================================================================<>"); gotoxy(1, 4); cprintf("<>==========================================================================<>"); gotoxy(1, 5); cprintf("|| Model Name : ||");...
  • Page 30 AR-B5205 Series User Manual // Show Got Parameter Informat textcolor(LIGHTGRAY); gotoxy(18,5); cprintf("%s",Model_Name); gotoxy(18,6); cprintf("%X",IO_PORT_BASE); // Enter W83627HF/HG Config outportb(IO_PORT_BASE,0x87); outportb(IO_PORT_BASE,0x87); // Set Multi-function Pins to GPIO outportb(IO_PORT_BASE,0x2A); Temp = inportb(IO_PORT_BASE+1); outportb(IO_PORT_BASE+1 , Temp | 0xFC); // Select GPIO Port device outportb(IO_PORT_BASE , 0x07);...
  • Page 31 AR-B5205 Series User Manual //=========================================================================== // Function : Show_Help() // Input // Change : - // Return : - // Description : Show Title string. //=========================================================================== void Show_Help() clrscr(); printf("GPIO Test utility for AR-B5205\n\n"); printf("PIN 1 (5 or 3.3V) PIN 2(GND)\n");...

  • Page 32: Bypass Programming

    AR-B5205 Series User Manual BYPASS PROGRAMMING This section describes the usage and control of BYPASS. AR-B5205 integrated BYPASS into Ethernet ports LAN1 & LAN2, and provides four bits GPOs - BYPASS WATCHDOG - to do BYPASS control. BYPASS illustrations, flow chart, test notes, and software-programming guide as below.
  • Page 33 AR-B5205 Series User Manual BYPASS flow chart Test notes Notes a. System power-off: forced BYPASS state. b. System power-on: forced NORMAL as initial state.
  • Page 34 AR-B5205 Series User Manual BYPASS software-programming guide Address port: 2E and Data port: 378 GPO # GPO 3 GPO 2 GPO 1 GPO 0 Bit # Bit 3 Bit 2 Bit 1 Bit 0 Default C:>debug Statement in C language...

  • Page 35: Electrical Characteristics

    AR-B5205 Series User Manual ELECTRICAL CHARACTERISTICS 6.1 Basic Electrical Characteristics Table Electrical Characteristics Value Parameter / Condition Unit Min. Typ. Max. External power input for system or +12V +12Vdc power output 11.4 12.0 12.6 (for power input, SATA … etc.) +5Vdc power output 4.75...

Table of Contents