Revision: 1.0 1. Introduction to ACS-N5430FL/8PO(12PO) Welcome to the ACS-N5430/8PO(12PO) industry Console Server, in which a Single Board Computer with high performance Intel Core2Duo or Mobile processor designed-in. The system is designed for extreme environment with of ℃ ℃ operating range from 0 to 50 .
Revision: 1.0 1.1 Specifications (included Rubber Foot) Item Description ACS-N5430FLT74/8PO(12PO) ACS-N5430FLT25/8PO(12PO) System ACS-N5430FLT530/8PO(12PO) ACS-N5430FLT440/8PO(12PO) CPU Board AR-B5430 series System Dimensions 251×165×67 (mm) 1.2 Packing List (1) ACS-N5430FL/8PO Description Q’ty ACS-N5430FL/8PO series Power Cord IDE HDD Cable(SATA Cable Option) KB/MS Cable...
Revision: 1.0 2. Procedure of Assembly/Disassembly 2-1 Installing the 2.5” Hard Disk Drive (HDD) The following are procedure for install 2.5”HDD device: 1. Remove bottom door screws (2pcs) in system bottom case. 2. Insert the rubbers into the HDD bracket for each edge.
Page 12
Revision: 1.0 3. Lock HDD and Bracket together via screws (4pcs). 4. Plug the HDD cable into the 44-pin header connectors in mainboard.
Page 13
Revision: 1.0 5. Remove right side door screws (2pcs) in system bottom case. 6. Route the HDD cable through the mainboard. 7. Lock right side door screws (2pcs) in system bottom case.
Page 14
Revision: 1.0 8. Plug HDD cable into the HDD module. 9. Lock HDD bracket back to case by four screws. 9. Lock the door screws in system bottom case.
Revision: 1.0 2-2 Installing the 2.5”SATA Hard Disk Drive (HDD) (Option) The following are procedure for install 2.5”HDD device: 1. Remove bottom door screws (2pcs) in system bottom case. 2. Insert the rubbers into the HDD bracket for each edge.
Page 16
Revision: 1.0 3. Lock HDD and Bracket together via screws (4pcs). 4. Plug the HDD cable into the power and signal header connectors in mainboard.
Page 17
Revision: 1.0 5. Remove right side door screws (2pcs) in system bottom case. 6. Route the HDD cable through the main board. 7. Lock right side door screws (2pcs) in system bottom case. 8. Plug HDD cable into the HDD module. 9.
Revision: 1.0 2-3 Installing CF card The following are procedure for install CF card: 1. Remove screws (2pcs) in CF card bracket. 2. Install CF card to the bracket. 3. Insert the CF card to CF card expansion slot. 4. Lock the door screws.
Revision: 1.0 2-4 Installing SO-DIMM The following are procedure for install SO-DIMM: 1. Remove HDD out from the system. 2. Install the SO-DIMM into the SO-DIMM socket. 3. Re-Install HDD device. 4. Lock the bottom case door screws.
Need help?
Do you have a question about the ACS-N5430FLT74/8PO and is the answer not in the manual?
Questions and answers