International Harvester Company Cub Lo-Boy C-60 Service Manual page 58

Reassembly
1. Install new filter element along with
cover and drain plug.
2. Install regulator valve, spring and
retainer, using new retainer gasket.
3.
Install oil intake pipe and screen.
4. Install crankcase pan, using new
gasket.
5. Install oil pump gears.
6.
Install pump body, using new gasket.
7. Install the flywheel and secure with
the four cap screws. Tighten cap screws
to 45 ft. lbs. torque.
8. Install the engine in the tractor.
Refer to page 1-11.
9. Fill crankcase with proper amount of
specified oil.
10. Prime oil pump, start engine and
check oil pressure.
11. Recheck crankcase oil level.
1-54