International Harvester Company Cub Lo-Boy C-60 Service Manual page 11

15. Relieve the IPTO clutch belt
tension by pushing in on the idler tension
arm nut with a 3/4 inch wrench and then
remove the drive belts from the tension
arm pulley.
16. Remove the frame top cover.
Move the snap ring forward from the
groove on the drive shaft. Slide the
drive shaft back until it clears the fly-
wheel retainer.
17. Remove the capscrews securing
the clutch coupling hub to the flywheel.
18. Remove the six capscrews, two
in front (7) and four in back (9), secur-
ing the engine to the frame.
19. Using attaching brackets FES 100
(1), attach a chain hoist to the engine and
lift it out of the tractor.
1. Attaching brackets FES 100
Printed in United States of America
GSS-1408 (Rev. No.4)
1-9B