Re-Attach Front Brake Cable - Huffy Multi-Speed Comfort Bicycles Owner's Manual

Front Wheel Install - Notes and Warnings:
NOTE: Ensure wheel spins freely without contacting fork or fender.
WARNING: Do not use Nuts (5) without serrations to attach the front wheel.
WARNING: Failure to obey these steps can allow the front wheel to loosen
while riding. This can cause injury to the rider or to others.

Re-attach Front Brake Cable:

Re-attach Front Brake Cable:
1. Squeeze the two Brake arms together
(A).
2. Insert the Brake Cable Guide (B) into
the cutout in the Guide Bracket (C).
3. Make sure the Brake Cable Guide
(B) is seated securely in the Guide
Bracket (C) cutout.
Check Front Brake Adjustment Before
Riding!
See Brakes Section Page 24
12
WARNING:
B
C
A
C
B
A