Troubleshooting - Pacvac Glide 300 Product & Training Manual

Troubleshooting

Caution: Always unplug the vacuum cleaner before attempting to solve a problem or when servicing.
PROBLEM: CAUSE:
Vacuum cleaner Power cord not firmly plugged into
not working power point.
Vacuum cleaner not turned on.
Thermal protector shuts off
vacuum cleaner due to high motor
temperature.
Circuit breaker or RCD has tripped.
SOLUTION:
Plug power cord into power point firmly.
Press on/off button.
Turn main switch off and unplug the vacuum cleaner. Conduct
safety and maintenance checks found in the Product and
Training Manual. After 30 minutes the vacuum cleaner should
be ready for use. If not contact Pacvac for your nearest
Authorised Pacvac Service and Warranty Agent.
Check the machine is in good working order. If OK, reset
circuit breaker or RCD. If circuit breaker or RCD trips again
contact your nearest Authorised Pacvac Service and
Warranty Agent.
Support: +61 8 9479 1444 www.pacvac.com 7