Table of Contents
Advertisement
Parameter
CPU Socket2
Processor Type
Processor Speed
CPU ID
Level 1 Cache
Level 2 Cache
Primary/Secondary/
Third/Fourth IDE
Master
Primary/Secondary
IDE Slave
Total Memory
DDR Memory Type
Interleave support
Mouse (PS2, USB)
Description
Indicates a processor is currently installed in the
CPU 2 socket. Refer to "Mainboard layout" on page
17 for the location of the CPU 2 socket.
Type of processor currently installed in the server.
The processor speed is the speed at which a
microprocessor executes instructions. Clock speeds
are expressed in megahertz (MHz), with 1 MHz
being equal to 1 million cycles per second. The
faster the clock, the more instructions the CPU can
execute per second.
ID number of the CPU.
Total amount of first-level cache memory or the
internal fast-accessed memory size (i.e., the memory
integrated into the CPU).
Total amount of the second-level cache memory
that comes with the CPU. The available cache sizes
are 256 and 512 KB.
Indicates the hard disk type device.
Indicates the type of IDE device.
Indicates the total amount of onboard memory. The
memory size is automatically detected by BIOS
during the POST. If you install additional memory,
the system automatically adjusts this parameter to
display the new memory size.
Press Enter to access the Total Memory submenu.
Type of memory module currently installed in the
server.
Indicates the type of bank interleave currently
supported by the memory.
Indicates the type of mouse connected to the
server.
87
Advertisement
Table of Contents
