Table of Contents
Advertisement
104
Parameter
NMI Assert
Reset
Disabled
Memory
Memory
Mirror/Spare
Event Log
Area
Event Logging
Clear All Event
Logs
View Event
Log
Event Control Interface
BIOS POST
Event
Logging
ECC Event
Logging
Description
Enables or disables the PCI bus parity error
support.
When this parameter is enabled, only the
the system's healthy memory size is
displayed during the POST process.
When this item is set to Mirror, only half of
the memory capacity will be detected by
the system OS.
When set to Sparing, a DIMM slot will be
reserved for standby in the event of
significant failures in a particular DIMM
and cannot be accessed by the system.
Displays the space available for event log
entries.
Enables or disables the event logging
function of the system.
When this item is set to Enabled, the event
log is cleared and this parameter is set to
Disabled for the next system bootup.
Opens the system event log file for
viewing.
BIOS checks the bad processors and
memory modules during the POST
process. When this parameter is enabled,
it will make a log of this operation.
ECC (Error Correcting Code) tests the
accuracy of data as it passes in and out of
memory. When this parameter is enabled,
single-bit and multi-bit memory errors will
be recorded in the event log.
4 BIOS setup
Option
Enabled
Disabled
No
Yes
Disabled
Mirror
Sparing
Enabled
Disabled
Disabled
Enabled
Enabled
Disabled
Enabled
Disabled
Advertisement
Table of Contents
