Zonedirector To Smartzone Migration; Monitoring Administrator Activities - Ruckus Wireless SmartZone 100 Administrator's Manual

3. In vSZ-D, type the name of the virtual data plane.
4. From the Bandwidth drop-down menu, select the license bandwidth you want to assign to
the virtual data plane. Default is 1 Gbps.
5. Click Add. The vSZ-D with the assigned license bandwidth is displayed.
6. Click OK.
The message Submitting form appears, and the vSZ-D is assigned a bandwidth.
You have successfully assigned a license bandwidth to the virtual data plane.

ZoneDirector to SmartZone Migration

SmartZone controllers are better equipped to handle large WiFi deployments such as within
campuses and when customers are vastly distributed; therefore, Ruckus Wireless recommends
that you migrate existing ZoneDirector deployments to SamrtZone controller deployments. You
can migrate ZoneDirector AP configuration information to SmartZone controllers from the controller
itself, using a migration tool.
The AP models should be supported by the controller.
Only ZD versions 9.13, 9.13.1, 9.13.2 and 9.13.3 are supported.
NOTE:
1. Go to Administration > ZD Migration.
The ZoneDirector Migration page appears.
2. Configure the following:
1. ZoneDirector IP Address: Type the IP address of the ZD that you want to migrate.
2. Admin Credentials: Enter the username and password details to access/login to ZD.
3. Click Connect. Lists of APs connected to the ZD deployment are displayed.
4. Click Select AP to choose the AP information that you want to migrate from ZD.
5. Click Migrate to migrate the AP. The controller imports the ZD configuration and applies
it to the selected AP.
The ZoneDirector Migration Status section displays the status of the migration. When
completed successfully, a success message is displayed. If migration fails, a failure message
is displayed and you can attempt the migration process again.

Monitoring Administrator Activities

The controller keeps a record of all actions and configuration changes that administrators perform
on the server. This feature enables you and other administrators in the organization to determine
what changes were made to the controller and by whom.
1. Go to Administration > Admin Activities.
2. Select the Admin Activities tab. the Admin Activities page displays the administrator actions.
The following information is displayed:
SmartZone 100 and Virtual SmartZone Essentials Administrator Guide for Release 3.5.1
Administering the Controller
ZoneDirector to SmartZone Migration
279