Advertisement
Installation Instructions
Cutout for Double Built-In Oven
A2
ALLOW 11/16"
FOR OVERLAP
Allow 11/16"
OF THE OVEN
OVER SIDE EDGES
(1.8 cm) for
overlap of oven
OF CUTOUT
over side edges
of cutout
BETWEEN INSIDE
Allow a minimum
ALLOW A MINIMUM OF 21"
of 21" (53.3 cm) for
FOR CLEARANCE TO
clearance to adjacent
ADJACENT CORNERS,
corners, drawers,
Allow 1" (2.5 cm)
DRAWERS, WALLS ETC.
walls, etc. when
WHEN THE DOOR
door is open
overlap of oven
IS OPENED.
ALLOW 1" FOR
(3.2 cm) overlap
ON OVEN TOP
AND BOTTOM
21"
21"
(53.3 cm)
If the cabinet does not have a solid bottom,
two braces or runners must be installed
level with the bottom of the cutout to
support the weight of the oven. For double
ovens, the runners and braces must
support 375 lbs. (169 kg).
NOTE: If marks, blemishes or the
cutout opening are visible above the
installed oven, it may be necessary to
add wood shims under the runners and
front trim until the marks or opening
are covered.
Cutout
Width
28 1/2"
CUTOUT
(72.4 cm) Min.
WIDTH
28 5/8"
28 1/2" MIN.
28 5/8" MAX.
(72.7 cm) Max.
Opening
Between
Inside Walls
Must Be
At Least
THE OPENING
28 1/2"
Cutout
WALLS MUST
(72.4 cm)
BE AT LEAST
Height
Wide
28 1/2"WIDE
51 13/16"
CUTOUT
(131.6 cm) Min.
HEIGHT
minimum for
51 15/16"
51 13/16" MIN.
(131.8 cm) Max.
51 15/16" MAX.
1
top and 1
⁄
"
4
OVERLAP
of oven bottom
of cutout
OF CUTOUT
Recommended cutout
RECOMMENDED
CUTOUT LOCATION
30"
location from floor
30"
12" FROM THE FLOOR
(76.2 cm)
12" (30.5 cm)
CABINET
Cabinet
WIDTH
Width
7 3/4"
(19.7 cm)
Cabinet Width 30" (76.2 cm)
Max.
5"
Recommended
Cutout
Junction Box
Location
JUNCTION BOX
Location
LOCATION
from Floor
Cutout Depth 23 1/2" (59.7 cm) Min.
Cutout Width 28 1/2" (72.4 cm) Min.
47" (119.4 cm) Min.
Cutout Height 51 13/16" (131.6 cm) Min.
47" TO
to Bottom of
BOTTOM OF
Junction Box
JUNCTION BOX
Suitable
Bracing
to Support
UITABLE
Runners
RACING
O SUPPORT
UNNERS
The solid bottom or runners must be level
with the bottom of the cutout, or the bottom
trim may not install correctly and then
interfere with the door opening.
5
12" (30.5 cm)
28 5/8" (72.7 cm) Max.
51 15/16" (131.8 cm) Max.
NOTE: If the cabinet does
not have a front frame and the
sides are less than 3/4" (1.9 cm)
thick, shim both sides equally
to establish the cutout width.
C L
21 5/8"
21 5/8"
OVER CENTERLINE
(54.9 cm)
OF CABINET
Over Centerline
of Cabinet
Install a
2" x 4" or
EQUIVALENT
solid bottom
RUNNERS
or 2" x 4"
(5 cm x 10 cm)
or equivalent
runners level
with bottom
of cutout
Advertisement
