Advertisement
Cutout for Single Built-In Oven
A1
ALLOW 11/16" FOR
OVERLAP OF THE
Allow 11/16"
OVEN OVER SIDE
(1.75 cm) for
EDGES OF CUTOUT
overlap of oven
over side edges
of cutout
21"
21"
(53.3 cm)
ALLOW A MINIMUM
Allow a minimum
OF 21" FOR CLEARANCE
of 21" (53.3 cm) for
TO ADJACENT CORNERS,
clearance to adjacent
DRAWERS, WALLS ETC.
WHEN THE DOOR IS OPENED.
corners, drawers,
walls, etc. when
door is open
If the cabinet does not have a solid bottom,
two braces or runners must be installed
level with the bottom of the cutout to
support the weight of the oven. For single
ovens, the runners and braces must
support 200 lbs. (90 kg).
NOTE: If marks, blemishes or the
cutout opening are visible above the
installed oven, it may be necessary to
add wood shims under the runners and
front trim until the marks or opening
are covered.
Side by Side Installations
Install two wall ovens in separate cutouts.
Allow 2" (5.1 cm) min. between cutouts.
2" (5.1 cm)
Cutout –
Min.
Observe all
dimensions
and
requirements.
Installation Instructions
Cutout Width
CUTOUT
28 1/2" Min.
WIDTH
28 5/8" Max.
28 1/2" MIN.
28 5/8" MAX.
(72.4 to 72.7 cm)
Opening
Between
THE OPENING
Inside Walls
Cutout
BETWEEN INSIDE
CUTOUT
Must Be
Height
WALLS MUST
HEIGHT
At Least
BE AT LEAST
27 1/4" Min.
27 1/4" MIN.
28 1/2"WIDE
28 1/2"
27 5/16" MAX.
27 5/16" Max.
(72.4 cm)
(69.2 to 69.4 cm)
Wide
RECOMMENDED
CUTOUT
Recommended
Allow 1" (2.5 cm)
LOCATION
ALLOW 1" FOR
cutout location from
32 1/2"
OVERLAP
minimum for
floor 32 1/2" (82.6 cm)
FROM THE
ON OVEN TOP
overlap of oven
FLOOR
AND BOTTOM
1
top and 1
⁄
"
OF CUTOUT
4
(3.2 cm) overlap
of oven bottom
of cutout
CABINET
Cabinet
WIDTH
30"
Width
30" (76.2 cm)
Cutout –
Observe all
dimensions
and
requirements.
7 3/4"
Junction Box
5"
Location
(19.7 cm)
(junction box
Cabinet Width
Max.
may be
located in
JUNCTION BOX
adjacent
Recommended
LOCATION
cabinet)
Cutout Location
from Floor
Cutout Depth
22" TO
22" (55.9 cm) Min.
BOTTOM OF
Cutout Width
to Bottom of
JUNCTION BOX
Junction Box
Cutout Height
Suitable
Bracing
to Support
Runners
The solid bottom or runners must be level
with the bottom of the cutout, or the bottom
trim may not install correctly and then
interfere with the door opening.
This oven is not approved for
stackable installation.
4
30" (76.2 cm)
32 1/2" (82.6 cm)
23 1/2" (59.7 cm) Min.
28 1/2" (72.4 cm) Min.
28 5/8" (72.7 cm) Max.
27 1/4" (69.2 cm) Min.
27 5/16" (69.4 cm) Max.
NOTE: If the cabinet does
not have a front frame and
the sides are less than 3/4"
(1.9 cm) thick, shim both
sides equally to establish
the cutout width.
C L
21 5/8"
21 5/8"
OVER CENTERLINE
(54.9 cm)
OF CABINET
Over Centerline
of Cabinet
Install a
2" x 4" or
EQUIVALENT
solid bottom
RUNNERS
or 2" x 4"
(5 cm x 10 cm)
or equivalent
runners level
with bottom
of cutout
Advertisement
