Chapter 3 Maintaining The Appliance; Power Supplies - Cisco 380 Series Hardware Installation Manual

Maintaining the Appliance
Revised: October 4, 2013
Part Number: OL-29172-01
This chapter provides maintenance information about the Cisco 380 and Cisco 680 series appliance,
including how to replace the pre-installed hard disk drives.
This chapter includes the following sections:
•
•
•
•

Power Supplies

The Cisco 380 and Cisco 680 series appliance ships with either two AC power supplies or two DC power
supplies installed.
Each AC power supply provides 650 watt output power. Each DC power supply provides 930 watt output
power. For additional information, see the
The AC power supplies can use any of the power cables listed in
section on page
the power unit.
You cannot add additional power supplies but you can replace a failed power supply. You cannot use a
Note
combination of AC and DC power supplies. When you replace a power supply, you must replace it with
the same type of unit.
OL-29172-01
Power Supplies, page 3-1
Remote Power Management, page 3-2
Replacing Hard Drives, page 3-3
Replacing Hard Drives, page 3-4
C-1. The DC power supplies use only one model of power cord, which is included with
C H A P T E R
"Power Specifications" section on page
"Supported Power Cords and Plugs"
Cisco 380 and Cisco 680 Series Hardware Installation Guide
3
A-3.
3-1