Cisco 380 Series Hardware Installation Manual page 25

Chapter
Table 1-2 Rear Panel LEDs, Definitions of States (continued)
LED Name
1-Gb Ethernet link speed
1-Gb Ethernet link status
Identification
OL-29172-01
State
Off—link speed is 10 Mbps.
•
Amber—link speed is 100 Mbps.
•
Green—link speed is 1 Gbps.
•
Off—No link is present.
•
Green—Link is active.
•
Green, blinking—Traffic is present on the active link.
•
Off—The Identification LED is not in use.
•
Blue—The Identification LED is activated. (For more information, see
•
Hard Drives" section on page 3-3.)
Cisco 380 and Cisco 680 Series Hardware Installation Guide
"Replacing
1-11