Honda ST1300 2007 Owner's Manual page 164

Installation
1. Install the side collars in the wheel and position it between the fork legs.
Insert the front axle shaft from the left side, through the left fork leg and
wheel hub.
2. Align the end of the front axle shaft with the surface of the fork leg.
3. Tighten the front axle pinch bolts on the left fork leg to the specified torque:
16 lbf·ft (22 N·m , 2.2 kgf·m)
4. Tighten the front axle bolt to the specified torque:
58 lbf·ft (78 N·m , 8.0 kgf·m)
5. Install the brake caliper assembly onto the fork leg.
To avoid damaging the brake pads while installing the brake caliper assembly,
carefully fit the brake disc between the pads.
6. Install the right caliper fixing bolts and left caliper socket bolts and tighten to
the specified torque:
23 lbf·ft (31 N·m , 3.2 kgf·m)
If You Have a Flat Tire
Taking Care of the Unexpected
surface of fork leg
end of axle shaft
(cont'd)
157