Honda ST1300 2007 Owner's Manual page 69

Braking
If the ABS indicator light blinks while riding, stop the motorcycle in a safe
place and turn off the engine. Turn the ignition ON again. The light should
come on, and then go off after starting to ride. If it does not go off or if it blinks
again, ABS is not functioning.
However, the Linked Braking System will still provide normal stopping ability,
but you should have the ABS system checked by your Honda dealer as soon as
possible.
The ABS indicator may blink if you place the motorcycle on its center stand and
turn the rear wheel. This is normal. Turn the ignition OFF to stop the blinking.
A red LED is used for the ABS indicator light. Be sure that the LED lights when
the ignition is ON. If the LED fails to light, see your Honda dealer.
62
Basic Operation & Riding