Connecting - Siemens SITRANS F Operating Instruction

Connecting

The following contains a short description of how to connect the sensor for operation with a
SITRANS F C MASS 6000 or SIFLOW FC070 transmitter.
Note
For more information, including information about connecting the sensor to the transmitter,
refer to the Operating Instructions for the respective transmitters.
Only qualified personnel may carry out work on the electrical connections.
Before connecting
● Check that serial numbers on sensor and SENSORPROM® unit are identical.
SITRANS FCS200
Operating Instructions, 02/2011, A5E02508199-01
WARNING
Figure 5-1 Sensorprom
WARNING
Use in hazardous locations
Before connecting check that:
 No explosion hazard exists
 A fire department permission certificate has been issued
 All connection leads are potential free
Special requirements apply to the location and interconnection of sensor and
transmitter. See "Installation in hazardous area" (Page 10)
5
19